Home> Products

All Products

(Total 321 Products)

  • PVA for Oil and Gas Applications

    Proper oil well cementing with KURARAY POVAL™ as a fluid loss additive has been successfully performed for many years. This polyvinyl alcohol additive contributes to cost savings and has shown no retardation effect on the cement setting time....

  • 100% Biodegradable Polylactic acid PLA

    PLA is a biodegradable environmentally friendly material (in the composting conditions, broken down into carbon dioxide and water), widely used in injection molding, blown films, extruded sheets, fibers and other industries and areas.it takes...

  • 100% Biodegradable Polyhydroxybutyrate PHB

    Since PHB was discovered in B. megaterium in 1925, its existence has been confirmed in more than 60 genera of bacteria, such as Alcaligenes (Alcaligenes), Azotobacter (Azotobacter) and Pseudomonas (pseudomonas). Spp.), etc. In some G+ and G-...

  • Bio-based Polyvinyl alcohol PVA

    Poly(vinyl alcohol) (PVOH, PVA, or PVAl) is a water-soluble synthetic polymer. It has the idealized formula [CH2CH(OH)]n. It is used in papermaking, textiles, and a variety of coatings. It is colourless (white) and odorless. It is sometimes supplied...

  • 100% Biodegradable Polyhydroxyalkanoates PHA

    Polyhydroxyalkanoates or PHAs are polyesters produced in nature by numerous microorganisms, including through bacterial fermentation of sugars or lipids. When produced by bacteria they serve as both a source of energy and as a carbon store. More...

  • 100% Biodegradable Starch-based plastics

    Thermoplastic starch currently represents the most widely used bioplastic, constituting about 50 percent of the bioplastics market[citation needed]. Simple starch bioplastic film can be made at home by gelatinizing starch and solution casting. Pure...

  • Imported Premium Epoxidized fatty acid methyl esters

    Compared with epoxy vegetable oil plasticizers, epoxy fatty acid methyl ester plasticizer can not only fully or partially replace the DOP plasticizer create non-toxic and environmentally friendly PVC products, used in food packaging, medical...

  • Imported epoxidized Chinese tallow butyl ester

    Light yellow oily liquid. The density of 0.9596. Index of refraction 1.2620. The acid value is less than 1. It has good light, heat and aging resistance. Used as a plasticizer of PVC, it was prepared from catalpa oil esterified with butanol to butyl...

  • Imported Premium Cresyl Diphenyl Phosphate

    Toluene diphenyl phosphate (flame retardant CDP) is mainly applicable to PVC, VC copolymer, polyvinyl acetal, cellulose nitrate, cellulose acetate, butyl acetate cellulose, natural and synthetic rubber and other flame retardants, plasticizers,...

  • Imported Premium talcum powder

    It has good physical and chemical properties such as lubricity, fire resistance, acid resistance, insulation, high melting point, chemical inactivity, good hiding power, softness, good luster, strong adsorption, etc. Because the crystalline...

  • Imported Premium Aluminium distearate

    It can be used as the raw material of metal antirust agent. Also can be used in building materials waterproofing agent, paint and ink thickener, cosmetics emulsifier and plastic lubricants. It can also be used as a heat stabilizer for PVC.

  • Imported Premium calcium stearate

    Heat stabilizer for PVC and a variety of plastics processing lubricants, mold release agent. In hard products, the gelation rate can be increased when it is combined with base lead salt and soap. Also used in food packaging, medical equipment and...

  • Imported Premium channel black

    Slot method of carbon black is based on natural gas as raw material, through thousands of ceramic burner, in natural ventilation room "" fire incomplete combustion with air, forming a tail diffusion flame, its reduction zone into contact with slow...

  • Imported PLA for Foam

    It can be converted into an expanded foam sheet with use temperatures up to 77°F (25°C). This foam is lightweight, strong and suitable for packaging fresh meat and vegetables. In order to extrude a foam with desired expansion properties, this grade...

  • Imported PVA Remoistenable Adhesives

    Polyvinyl alcohol (PVA) : Organic compound, white flake, flocculent, or powdered solid, tasteless. Soluble in water (above 95℃), slightly soluble in dimethyl sulphone, insoluble in gasoline, kerosene, vegetable oil, benzene, toluene, dichloroethane,...

  • PVA for PVC Production

    PVC production employs the suspension polymerization process when manufacturing PVC. KURARAY POVAL™ is used in the initial process of creating the suspension solution with vinyl chloride monomer (VCM) and water. When used as a dispersing agent,...

  • Imported PVA Temporary Binder

    KURARAY POVAL is outstandingly suitable as a temporary binder and plasticizer for ceramic compounds. It breaks down almost entirely into water and carbon dioxide when a ceramic moulding is fired. The possible applications depend essentially on the...

  • PBS for disposable cutlery

    White particles, polybutanediol (PBS), are synthesized by condensation polymerization of succinic acid and succinic alcohol. The resin is milky white, odorless and tasteless, easy to be decomposed and metabolized by various microorganisms or enzymes...

  • Imported PHA for automotive

    Using MINERV PHAs (Polyhydroxyalkanoates developed using beets) Bio-on has identified the possibility of producing a new family of naturally biodegradable polyesters derived from sugar beets. The MINERV PHAs logo identifies the product that will in...

  • Exported Premium ammonium sulfate

    Colorless crystals or white particles. No smell. Decomposition above 280℃. Solubility in water: 70.6g at 0℃, 103.8g at 100℃. Insoluble in ethanol and acetone. The pH of 0.1mol/L aqueous solution is 5.5. Relative density 1.77. Refractive index 1.521....

  • Imported PHA for beverage package

    Using MINERV PHAs (Polyhydroxyalkanoates developed using beets) Bio-on has identified the possibility of producing a new family of naturally biodegradable polyesters derived from sugar beets. The MINERV PHAs logo identifies the product that will in...

  • PHA for Injection molding

    Polyhydroxy fatty acid ester (polyhydroxyalkanoates and PHA), is quickly developed in recent 20 years, is one of the many microbial synthesis of polyester in the cell, is a kind of natural macromolecule biomaterial due to PHA and at the same time...

  • Imported Thermoplastic Biodegradable PBAT

    Poly(butylene adipate-co-terephthalate) (PBAT), also known as polybutyrate, is a semi-aromatic, biodegradable thermoplastic copolyester that can be easily molded and thermoformed. It is produced by random co-polymerization of 1,4-butanediol, adipic...

  • PHA for melt spinning of fibers

    Polyhydroxy fatty acid ester (polyhydroxyalkanoates and PHA), is quickly developed in recent 20 years, is one of the many microbial synthesis of polyester in the cell, is a kind of natural macromolecule biomaterial due to PHA and at the same time...

Related Products List
Home> Products

Copyright © 2024 Xingbang High Molecular Materials Co., Ltd. All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send